Stihl RE 80.0 Manual De Instrucciones página 36

English
Attaching spraying set
► Insert spraying set (1).
6.2 Fitting and removing the high-
pressure hose
6.2.1 Connecting high-pressure hose
2
1
► Push the connector (1) in the high-pressure
washer (2).
The connector (1) engages with an audible click.
► If it is difficult to slide the connector (1) into the
high-pressure washer: Grease the connector
(1) with grease for fittings.
6.2.2 Removing high-pressure hose
1
► Press and hold the locking lever (2).
► Pull out the connector (2).
36
6.3
6.3.1
1
► Slide the connector (2) into the spray gun (1).
The connector (2) engages with an audible
click.
► If the connector (2) cannot be easily pushed
into the spray gun (1): Grease the gasket on
the connector (2) with grease for fittings.
6.3.2
► Press and hold the locking lever (1).
► Pull out the connector (2).
6.4
2
6.4.1
► Push spray lance (1) into spray gun (2).
► Twist the spray lance (1) until it engages.
► If the spray lance (1) cannot be pushed easily
into the spray gun (2): Grease the gasket on
the spray lance (1) with grease for fittings.
6 Assembling the pressure washer
Attaching and removing the
spray gun
Attaching the spray gun
1
2
Removing the spray gun
1
2
Attaching and removing the
spray lance
Attaching the spray lance
2
1
0458-001-8721-B