STEINEL L 830 SC Manual Del Usuario página 34

GB
1� About this document
Please read carefully and keep in a safe place�
– Under copyright. Reproduction either in whole or in part only with our consent.
– Subject to change in the interest of technical progress.
Symbols
!
Hazard warning!
Reference to other information in the document�
...
2� General safety precautions
Disconnect the power supply before attempting any work
!
on the unit�
• During installation, the electric power cable being connected must not be
live. Therefore, switch off the power first and use a voltage tester to make
sure the wiring is off-circuit.
• Installing the sensor-switched light involves work on the mains voltage sup-
ply. This work must therefore be carried out professionally in accordance
with national wiring regulations and electrical operating conditions.
• Only use genuine replacement parts.
• Repairs may only be made by specialist workshops.
3� L 830, L 835, L 840, GL 80 SC / C
Proper use
– Sensor-switched light for mounting on outdoor walls
(L 830, L 835, L 840 SC).
– Light for mounting on outdoor walls (L 830, L 835, L 840 C).
– Sensor-switched light for mounting on outdoor ground surfaces (GL 80 SC).
– Light for mounting on outdoor ground surfaces(GL 80 C).
Note:
To rule out malfunctioning, a minimum distance of 3 m must be allowed from
the Wi-Fi router and the access points.
The sensor-switched lights (SC) feature an active motion detector.
The integrated HF sensor emits high-frequency electromagnetic waves (5.8 GHz) and
– 34 –