STEINEL L 830 SC Manual Del Usuario página 35

receives their echo. Any movement by persons in the sensor switched light's detection
zone is noticed by the sensor as a change in echo. A microprocessor then issues the
switch command "switch light ON". Detection is possible through doors, panes of glass
or thin walls. Analysing the signal, the sensor distinguishes between moving persons
and moving objects, such as bushes or small animals. This rules out any inadvertent
triggering by small animals as well as interference from extreme temperatures.
The functions of the sensor-switched light can be set via smartphone and tablet.
Bluetooth interconnection is only possible via smartphone or tablet.
Note: The high-frequency output of the iHF-sensor is approx. 1 mW – that's
1,000 times less than the transmission power of a mobile phone or the output
of a microwave oven.
Package contents L 830, L 835, L 840 SC / C (Fig� 3�1)
– Luminaire
– Three screws
– Three wall plugs
– Three spacers
Product dimensions L 830 SC / C (Fig� 3�2)
Product dimensions L 835 SC / C (Fig� 3�3)
Product dimensions L 840 SC / C (Fig� 3�4)
Product components L 830, L 835, L 840 SC / C (Fig� 3�5)
A Wall mount
B Connecting terminal
Sealing plug
C
D Plug connection
E Light cube
Package contents GL 80 SC / C (Fig� 3�6)
– Luminaire
– Profile
– Base plate
– Four floor / ground screws
– Four wall plugs
– Four connecting screws
Product dimensions GL 80 SC / C (Fig� 3�7)
Product components GL 80 SC / C (Fig� 3�8)
A Cover cap
Connecting terminal
B
D Plug connection
E Light cube
Earth terminal
F
– 35 –
GB