Bosch GCM 8 S Professional Manual Original página 26

OBJ_BUCH-198-007.book Page 26 Friday, June 10, 2011 9:29 AM
26 | English
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbols and their meaning
Laser Radiation
Do not stare into beam
Class 2 laser product
Wear safety goggles.
Wear ear protectors. Exposure to noise
can cause hearing loss.
Wear a dust respirator.
Keep hands away from the cutting area
while the machine is running. Danger of
injury when coming in contact with the saw
blade.
Danger area! Keep hands, fingers or
arms away from this area.
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline
2002/96/EC for Waste Electrical and Elec-
tronic Equipment and its implementation
into national right, power tools that are no
longer usable must be collected separately
and disposed of in an environmentally cor-
rect manner.
Observe the dimensions of the saw blade. The hole diameter
must match the tool spindle without play. Do not use reduc-
ers or adapters.
1 609 929 X05 | (10.6.11)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood as well as in
particle and fibre board. In this, mitre angles from –50° to
+58° as well as bevel angles from 0° to 45° are possible.
When using appropriate saw blades, sawing aluminium and
light metals is also possible.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Slide device
2 Transport handle
3 Blade guard
4 On/Off switch
5 Handle
6 Retracting blade guard
7 Roller
8 Saw table
9 Scale for mitre angle (horizontal)
10 Insert plate
11 Locking knob for various mitre angles
12 Mitre detent lever
13 Mitre angle indicator
14 Detents for standard mitre angles
15 Mounting holes
16 Mounting holes for material clamp
17 Extension bar*
18 Fence
19 Scale for bevel angle
20 Indicator for bevel angle
21 Bevel lock lever
22 Sawdust ejector
23 Depth stop
24 Allen screws (6 mm) of the fence
25 Locking screw for slide device
26 Allen key (size 6 mm)/Phillips screwdriver
27 Transport safety-lock
28 Laser warning label
29 Switch for marking of cutting line ("Laser")
30 Light switch ("Light")
31 Tilt protector
32 Tilt-protector lock nut
33 Metal bar of tilt protector
Bosch Power Tools