packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the Official Cecotec Technical Support Service
immediately.
Box content. Fig. 3
-
Oven
-
Rack
-
Glass tray (for microwave function)
-
Enamelled oven tray
-
Installation tools
-
Instruction manual
3. INSTALLATION
Electrical connections
-
The appliance is fitted with a plug and must only be connected to a properly installed
earthed socket.
-
Only a qualified electrician who is aware of the relevant regulations may install the socket
or replace the connection cable.
-
If the plug is not accessible after the installation of the appliance, fit a single-pole isolating
switch on one side with a contact distance of at least 3 mm. The installation must ensure
contact protection. Fuse protection: check technical data.
Installation
-
The appliance is exclusively designed to be installed in a kitchen.
-
This appliance is not designed to be used as a table-top appliance.
-
The built-in cabinet must not have a rear wall behind the appliance.
-
You must keep a space of at least 45 mm between the wall and the base or the rear panel
of the top unit.
-
The cabinet in which the device is to be installed must have a ventilation opening of 250
cm
To ensure this, cut out the base panel or fit a ventilation grid.
2.
-
Ventilation slots and air inlets must not be covered.
-
Safe operation of this appliance can only be guaranteed if it has been installed in
accordance with these installation instructions.
-
The installation technician shall be liable for any damage resulting from incorrect
installation.
-
The furniture in which the appliance is installed must be heat-resistant up to 90 °C.
BOLERO HEXA MWS704500 GLASS BLACK
ENGLISH
61