cecotec BOLERO HEXA MWS704500 GLASS BLACK Manual De Instrucciones página 62

ENGLISH
- The minimum installation height is 850 mm.
- In figure 4, you can see the dimensions required for the installation.
- Note: a gap should be left above the oven.
- Do not transport or hold the appliance by the door handle. The door handle cannot
withstand the weight of the appliance and could break.
Important
- It is essential that you do not twist the connection cable during installation of the built-in
oven.
- When installing the built-in oven, avoid closing the space between the worktop and the
appliance by using additional slaps.
- Keep this space unobstructed to allow for proper air circulation and to avoid possible
ventilation problems. An adequate airflow is essential for efficient performance and
durability of the oven.
Fig. 5
1. Insert the oven into the selected cabinet, making sure that it is in the centre of the
opening. Ensure that the oven is level and correctly positioned before continuing with the
installation process.
2. Once the oven is in its proper position, proceed to securely fasten it in the cabinet. Open the
oven door and use the screws provided to secure it in place. Use the numbered items [5],
[6] and [7] provided to secure the oven in position. Fig. 6
Important
To avoid damage to the oven or the appliance housing, it is important not to over-tighten the
screws [5]. We recommend that you use a screwdriver to perform this task with precision and
caution.
Fig. 4 key:
1. Rear ventilation openings, minimum 250 cm
2. Open rear panels
3. Ventilation area in the base, minimum 250 cm
4. Ventilation grid
5. Cabinet base
6. Ventilation area in the base, minimum 250 cm
7. Open rear panel
Fig. 5 key:
1. 20 mm for metal mouldings
62 BOLERO HEXA MWS704500 GLASS BLACK
2
2
2