cecotec BOLERO COOLMARKET TT B1 121 E Manual De Instrucciones página 57

Press the button
-
display will show 2ºC .
The Fast Cooling function will automatically switch off after 6 hours.
-
When the Fast Cooling function is activated, you can deactivate it by pressing the button
-
again, the temperature setting of the cooler will return to its previous state.
Temperature
3.
- Press the button
control display will show the corresponding figures according to the following sequence:
NOTE: High temperature settings can accelerate food wastage.
4. Alarm
- In case of alarm, the icon
- Leaving the refrigerator door open for more than 1 minute will activate the door alarm,
sounding 3 beeps every minute for 10 minutes and the icon will illuminate and flash. The
alarm will stop sounding when you close the door.
- Press the button
- To save energy, avoid leaving the door open for a long time when using the refridgerator.
5. PREPARING FOR USE
This section explains how to use the refrigerator efficiently. It is recommended to read them
carefully before using the appliance.
Waiting time
Once the refrigerator is correctly installed and clean, do not turn it on immediately, wait at
least 2-4 hours before connecting it to the power supply to ensure normal operation.
Switch-on
Before putting food into the refrigerator, check that the temperature drops noticeably, this
indicates that the refrigeration system is working normally.
Door shelf
- They are ideal to store eggs, canned liquids, bottles, packed food, etc. Do not place too
many heavy items on these shelves.
- To remove it, slowly pull the shelf in the direction of the arrows (Fig. 8) until it comes loose,
to activate the Fast Cooling function. The light will illuminate and the
to set the chiller temperature between 2°C and 8°C as required, and the
will light up and flash, and the refrigerator will beep.
to stop the alarm, the beep and the icon will turn off.
ENGLISH
Bolero CoolMarket TT B1 121 E
57