Husqvarna 525PT5S Manual Del Usuario página 24

Guidebar and saw chain combinations
Recommended guide bar and saw chain combination.
Guide bar
Length, in
10
12
10
12
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
H35
5/32 in / 4.0 mm
S93G
24
Pitch, in
3/8
80°
60°
Accessories
Note:
This guide bar deviates from the Husqvarna
standard and must be of type A318 to fit the product.
Gauge, in
0.050
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
30°
Saw chain
Type
Husqvarna H35
Husqvarna S93G
0.025 in /
0.65 mm
712 - 009 - 29.08.2023
Length, drive links,
no.
40
44
40
45
505 24 37-01
587 80 90-01