8.4.
LYOQUESTLOGGER SOFTWARE
Software for monitoring on PC (Fig. 16) that provides data for the vacuum and the temperatures of the condenser,
plates and product.
The equipment is connected by a RS-232 serial port on PC and it sends information in real time.
A data packet is sent every second in order to know the freeze dryer state.
The serial port is automatically configured by the software.
The dataflow is unidirectional from the freeze dryer to the PC. It means that it is only possible to monitor, and not to
control, the equipment connected to the PC.
Minimum computer requirements:
Intel Pentium II o ADM Athlon Processor.
-
512 MB of RAM.
-
Operating system: Windows XP, Windows 2000 o Windows 7.
-
Fast IDE Hard Drive with more capacity than 5GB.
-
SVGA Graphics card (32 bits colour at 1024 x 768 Pixels).
-
IM-LYOQUEST-EN-SP-1016a.doc
Fig. 16
17 / 80