Publicidad
Idiomas disponibles
Idiomas disponibles
The language selection screen allows you to choose the language of the program (English, Spanish or French) by
selecting the corresponding option.
On the screen of screen adjustments, the terminal brightness and contrast may be adjusted.
On the synoptic screen (Fig. 29) it is possible to visualize the main components of the equipment that are working at
the given moment (they have the word ON next to the component). At the left top the evolution of the pressure may
be displayed.
9.6.
HOURS COUNTER VACUUM PUMP
In order to check the working hours of the vacuum compressor, press the third icon located on the inferior part of the
menu screen:
9.7.
STOP OF THE FREEZE-DRYER
When an automatic, semiautomatic or defrosting cycle is stopped, the compressor may remain working for a few
seconds in order to remove the gases from the circuit.
In case of an accidental stop, disconnection or power cut, the freeze-dryer will stop. When the power has been
restored, the process continues as it was before the cut and the equipment will recover its previous state.
IM-LYOQUEST-EN-SP-1016a.doc
Fig. 28
Fig. 30
Fig. 29
21 / 80
Publicidad
