Technical Data; Health Hazard By Dust; Symbols; Functional Description - Festool OF 1010 EQ Manual De Instrucciones

Health hazard by dust

Various dust created by power sand-
ing, sawing, grinding, drilling and other construc-
tion activities contains chemicals known (to the
State of California) to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products,
• Arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these
chemicals work in a well ventilated
area and use approved safety equip-
ment, such as dust masks that are spe-
cially designed to fi lter out microscopic
particles.
TO REDUCE THE RISK OF INJURY,
USER MUST READ INSTRUCTION MANUAL.
1.9
1.8
0
Power input
Speed of drive shaft
Quick height adjustment
Fine height adjustment
Drive shaft connection of the spindle
Weight
Protection class
Warning of general danger
Read the Operating Instructions/Notes!
Wear a dust mask.
Wear protective goggles!
V volts
A amperes
Hz hertz
W watt
~ alternating current
n no load speed
0
Class II Construction
rpm revolutions or reciprocation per minute

Functional description

1.1 Speed controller
1.1
1.2 Locking button
1.3

On/Off switch

1.4 Depth adjustment
1.2
1.5 Scale
1.3
1.6 Extractor connection piece
1.4
1.7 Pivoted turret stop
1.5
1.8 Collet nut
1.9 Spindle stop
1.6

Use for intended purpose

1.7
The routers are designed for routing wood, plastics
and similar materials. Aluminium and plasterboard
can also be processed with corresponding cutters
such as are listed in the Festool catalogues.
only be installed in work benches specially de-
signed by Festool. The electric power tool may
5

Technical data

9 500 - 23 000 rpm

Symbols

Festool electric power tools should
1010 W (8.4 A)
2-1/8" (55 mm)
5/16" (8 mm)
M 16x1.5
6 lbs. (2.7 kg)
/ II