CASO DESIGN M 20 Cube Ceramic Manual De Instrucciones página 54

13.14 Delayed Cooking
With this function you can start the microwave mode or the automatic cooking programs
with a time delay. Delayed cooking cannot be used for the defrosting functions or for quick
start.
1. In standby mode, press the corresponding buttons to set the power/ program which you
want to start later (step 1 + 2 of the respectice function).
2. Press the Autostart/Clock button once.
3. Turn the rotary knob to set the required hour for the start time of the delayed cooking.
4. Confirm with Autostart/Clock.
5. Turn the rotary knob to set the required minute for the start time of the delayed
cooking. Confirm with Autostart/Clock again.
► When the set start time is reached, then the device beeps and starts the cooking
operation.
► If the function has been activated, then you can display the set start time at any time by
pressing the Autostart / Clock button. Then you can press the Stop button to
deactivate the operation.
14 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
14.1 Safety information
Please observe the following safety notices, before you commence with cleaning the
device:
► The device must be cleaned regularly and any food residues must be removed.
Insufficient cleanliness of the device can lead to the destruction of the surface, which for
its part can have a negative impact upon the service life of the device and can lead to a
dangerous condition of the device as well as fungal and bacterial contamination.
► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet.
► The cooking chamber is hot after it is used. There is a danger of burns! Wait until the
device has cooled down.
► Clean the cooking chamber after use as soon as it has cooled down. Extended waiting
unnecessarily complicates cleaning and can make it impossible in extreme cases.
Excessive accumulations of dirt can even damage the device under certain
circumstances.
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
Please note
Attention
54