Publicidad
Idiomas disponibles
Idiomas disponibles
get
ready
Unpack the box
Chair
Power cord
Phillips-head
6mm ball Allen wrench
screwdriver
CHOOSE A LOCATION
When deciding where to place your Super Novo 2.0, consider the following:
• Place the unit on a flat surface, away from direct sunlight or any other direct heat source (to avoid fading).
• If you wish to place the unit on a hard surface, it is recommended that you place a piece of carpet or a soft mat
underneath it to avoid damaging the floor (minimum 48" x 28").
• To accommodate the footrest when deployed, make sure the area in front of the chair is clear for at least 24".
• To ensure the chair does not hit the wall when reclining, make sure there is a 2" clearance behind it.
Clearance
2"
humantouch.com
Use and care manual
Concierge Card
Warranty terms
Spare fuses (2)
250V, 5A
zip tie
Clearance
24"
4
Assembling your massage chair is easy!
and you're set to go!
MOVE THE CHAIR TO THE DESIRED LOCATION
CAUTION: To avoid injury to yourself and damage to the product, use two or more people to move the chair.
1. Person 1: Grasp the inside of the headrest, behind the head pillow.
Person 2: Fold the footrest up onto the seat and then grasp the handles on each side of the chair base.
2. Person 1: Push downward on the headrest to rotate the chair onto its mobility wheels.
Person 2: Lift the front of the chair.
3. Roll the chair on its mobility wheels to the desired location.
4. Gently lower the chair to the floor.
WARNING: Dropping the front of the chair to the floor may damage the chair and/or floor.
Simply plug in the power cord
Person 2
Person 1
5
Publicidad
