Publicidad
Idiomas disponibles
Idiomas disponibles
take
control
SETTING THE UNDERFOOT ROLLER SPEED
You can set the underfoot roller speed to slow, medium, or fast. You can also turn the rollers off. This setting affects both
manual and auto massage programs. This setting returns to the default (SLOW) when the chair is powered off and on again.
1. From the MAIN MENU, select SETTINGS to display the SETTINGS menu.
2. Select UNDERFOOT SPD, then select SLOW, MEDIUM, FAST, or OFF.
TIP: When the status screen is displayed,
use the navigation buttons to configure the
UNDFTSPD setting in the upper left-hand corner.
Foot massage too soft? Remove the softening soles from underneath your feet.
Simply open the foot/calf massage well zippers, remove the softening soles from
the bottom of the massage wells, then close the zippers.
humantouch.com
Bottom of the
massage wells
Softening Soles
24
Your Super Novo 2.0 calf massager has a lot of flexibility.
adjust the calf massager from your knee to your lower calves, or set it to AUTO
GLIDE mode, which moves up and down automatically. You can also control
the underfoot roller speed.
ADJUSTING CALF MASSAGE FOCUS
You can adjust the calf massage focus from your lower calves (default) up to your knees. You can also turn the AUTO
GLIDE feature on to enable it to move up and down. This setting returns to the default (AUTO GLIDE OFF) when the
chair is powered off and on again.
1. From the MAIN MENU, select SETTINGS to display the SETTINGS menu.
2. To move the calf massager up, press and hold UP.
3. To move the calf massager down, press and hold DOWN.
4. Select AUTO GLIDE ON to turn this feature ON (the text lights green); Select AUTO GLIDE ON again to turn it OFF.
You can manually
25
Publicidad
