Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
CONNECTING AN ELECTRIC DRYER (skip for gas drgers)
TOOLS YOU WILL NEED
[] Slip j0int pliers
[] Flat-blade screwdriver
[] Phillips screwdriver
[] Level
MATERIALS YOU WILL NEED
%
[] 4" dia. metal elbow
[] Gloves
[] 3/4" strain relief
(UL recognized)
[] 4" duct clamps (2) or
4" spring clamps (2)
[]Safety glasses
[] 4" dia. metal duct
(recommended)
[] 4'* dia. flexible metal
duct (if needed)
[]Exhaust hood
[] Duct tape
[] Dryer power cord kit
(not provided with dryer)
UL rated 120/240V,
30A with 3 or 4 prongs.
Identify the plug type as
per the house receptacle
before purchasing line cord.
FOR YOUR
SAFETY:
-_WARNING
Before making the electrical
connection,
turn off
the circuit breaker(s) or remove the druer's circuit
fuse(s) at the electrical
box. Be sure the druer cord
is unplugged
from the wall. NEVER LEAVE THE
ACCESS COVER OFF THE TERMINAL BLOCK.
ELECTRICAL CONNECTION
INFORMATION
FOR ELECTRIC DRYERS
-A WARNING
-
TO reduce the risk of
fire, electricel
shock and personal
injury:
• Do not use an extension
cord or an adapter
plug
with this appliance.
• The druer must be electricallu
grounded
in
accordance
with local codes and ordinances,
or in the absence of local codes, in accordance
with the NATIONAL ELECTRICAL CODE,
ANSI/NFPA NO. 70.
2O
Publicidad
