Publicidad
Idiomas disponibles
Idiomas disponibles
throttle valve and the throttle cable) can be adjusted for a certain stroke.
3. When fine-tuning, first loosen the lock nut on the upper adjusting solenoid, and then turn the upper adjusting solenoid
to adjust.
4. When making a larger range of adjustment, loosen the fastening nut and adjust the free stroke to 2～6mm.
5. The throttle cable should be filled with lubricating oil regularly to reduce the abrasion of the wire rope; the throttle
cable cannot be bent.
Danger:
1. The throttle cable is improperly routed and should be reinstalled correctly.
2. If the throttle cable is twisted, stuck or unable to return, the throttle control cable should be replaced.
3. After the free stroke adjustment of the throttle cable is completed, it must be ensured that the throttle control
handle can automatically return to the position and the idle speed will not increase. At the same time, after
adjustment, the engine idling speed cannot increase when turning the front of the vehicle.
[Throttle Body]
The throttle limit screw on the throttle body has been accurately set, and you cannot adjust it yourself. Check whether the
idling speed of the vehicle is stable (after the engine is fully warmed up, the idling speed of the engine should be between
1350~1650RPM per minute). If the idling speed is unstable, please ask the professional service personnel of the
maintenance unit designated by our company to check and deal with it.
50
Publicidad
