Publicidad
Idiomas disponibles
Idiomas disponibles
Please send the vehicle to the dealers' shop to adjust valve clearance at the intervals specified in the periodic maintenance
chart.
Intake valve clearance: 0.04-0.06mm.
Exhaust valve clearance: 0.10-0.13mm.
XV. Vehicle cleaning and storage
1. The motorcycle should be cleaned regularly in order to discover the damage, wear or oil leakage of the vehicle in time.
2. When cleaning, you must wait for the engine to cool down and rinse with clean water. After cleaning, dry the
motorcycle and start the engine and let it run for a few minutes; lubricate the chain with lubricating oil; check the brakes
before driving on the road, and the front and rear brakes should be normal.
3. Parts that cannot be sprayed with high-pressure water: headlights, turn signals, ignition switch locks, electrical switches,
meters, electrical parts and wiring, batteries, air filters, hubs, exhaust pipe outlets, under the fuel tank and engine Cylinder
head, etc. These parts are best wiped with a rag.
4. After cleaning, the braking performance may be reduced, so you must try to ride it and check it before it can be used
after adjustment and recovery.
[Vehicle storage]
After the motorcycle is used on the day, it should be stored in a dry, safe place with small temperature differences and
good ventilation. If it is stored for a long time (more than 30 days), necessary repairs should be performed before storing
72
Publicidad
