Publicidad
Idiomas disponibles
Idiomas disponibles
prepared in the factory and contains antifreeze, rust inhibitor, foam inhibitor and trace silicate, etc., and the use is
indicated on the container Ambient temperature.
Note:
1. This coolant is a special coolant and cannot be replaced with tap water or other liquids, otherwise it may cause
damage to the engine.
2. Please go to the designated dealership to purchase direct type coolant exclusively for aluminum alloy engines.
3. If the coolant needs to be replaced or coolant leakage occurs, please go to the designated dealership for
replacement and maintenance.
[Check coolant capacity]
The total amount of coolant in the cooling system is about 4000ml
1. Park the motorcycle on a flat ground with a single support.
2. Check the coolant level when the engine is cooling. The coolant level should be between the upper and lower scale
lines.
[Add a small amount of coolant]
If the coolant in the auxiliary water tank is at or below the lower mark, please add special coolant to the upper mark in
time.
67
Publicidad
