Sony RM-TP503 Manual De Instrucciones página 22

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting Sound Fields
Adjusting the surround parameters
1
Touch SURR EDIT on the SOUND FIELD screen.
The SURROUND screen appears.
2
Use the JOG DIAL or touch 4 or $ to scroll through
the list.
3
Push the JOG DIAL to select an item or touch the
aspect you want to adjust.
4
Touch
or
to adjust to the desired
value.
SURROUND EFFECT: Higher values increase the
"presence" of the surround effect.
WALL TYPE: Use to simulate different sonic
environments.
REVERB TIME: Use to control the spacing of the early
reflections to simulate a larger or smaller room.
SCREEN DEPTH: Use to control the extent to which the
sound appears to be coming from within the screen.
VIRTUAL SPEAKERS: Use to set whether to use the
virtual speakers or not.
Tone quality adjustments: Use these parameters to
adjust the overall sound quality of the selected
sound field.
5
Repeat steps 2 through 4 when there is more than
one aspect that you wish to adjust.
6
Touch EXIT when adjustment is finished.
Notes
• Items that cannot be adjusted due to the current speaker
settings or sound field mode are grayed out.
• If the alarm sounds, or all items appear to be grayed out, touch
RELOAD.
GB
22
Adjusting the speaker levels
1
Touch LEVEL on the SOUND FIELD screen.
The LEVEL screen appears.
2
Use the JOG DIAL or touch 4 or $ to scroll through
the list.
3
Push the JOG DIAL to select an item or touch the
item you want to adjust.
4
Touch
or
to adjust.
5
Repeat steps 2 through 4 when there is more than
one item that you wish to adjust.
6
Touch EXIT when adjustment is finished.
To adjust the speaker balance
Use TEST TONE to listen to the levels output from each speaker.
AUTO outputs the test tone to each speaker in order. You can also
select individual speakers to output the test tone. Adjust your
speaker levels so that the test tone is output at the same level
from all speakers.
Notes
• Items that cannot be adjusted due to the current speaker
settings or sound field mode are grayed out.
• If the alarm sounds, or all items appear to be grayed out, touch
RELOAD.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido