Eclipse CD7000 Manual Del Propietário página 60

Various Settings
Press the [SELECT] (Right/Left)
6
button to select the speaker output
position of the guidance tone.
L: Output from the left speaker
R: Output from the right speaker
Press the [CUSTOM] or [RTN]
7
button to exit function mode.
ATTENTION
• The guidance tone sounds in the following
way when the tone volume level is set from
1 to 7:
• When the map is switched: tone sounds
once
• When entering the vicinity of a guidance
point: tone sounds twice
• A sample tone is emitted when tone volume
or speaker output are selected, allowing
you to confirm the desired volume setting.
• The guidance tone volume will increase
automatically at high speeds if automatic
volume adjustment is set to ON (see page
90).
• The timing of the guidance tone may be
inaccurate depending on the quality of GPS
reception
60