Oase WATER TRIO Instrucciones De Uso página 27

Operation
The control box is operated via a radio signal using a 2-channel hand-held transmitter.
The hand-held transmitter has a maximum range of 80 m. Obstacles between transmitter and
receiver, a low battery in the hand-held transmitter, or electro-magnetic radiation of electrical
equipment will decrease the range.
Setting the device
When the control box is switched on (power plug plugged in), the hand-held transmitter can be
used to select 9 pre-programmed water or light features in sequence.
When switching on the unit, program 1 is always automatically selected.
• Button 1: Select next program.
• Button 2: Select previous program.

Align the water jet by changing the position of the movable nozzle.
Programs
P0 Unit off, stand-by mode
P1 All fountains active, fixed height up to max. 30 cm
Light on for all fountains
P2 All fountains active, fixed height up to max. 70 cm
Light on for all fountains
P3 All fountains active, dynamic fountain height, max. 70 cm high
Light on for all fountains
P4 One fountain each active in alternating intervals, max. 70 cm high
Light switched on for each active fountain
P5 All fountains active, fixed height up to max. 110 cm
Light on for all fountains
P6 All fountains active, dynamic fountain height, max. 110 cm high
Light on for all fountains
P7 One fountain each active in alternating intervals, max. 140 cm high
Light switched on for each active fountain
P8 All fountains active, dynamic fountain height, max. 140 cm high
Light on for all fountains
P9 Several fountains active alternately, max. 140 cm high
Light switched on for the respective active fountains
Note:
− If the unit is switched by means of a timer, program 1 is always started.
− Fountain heights can be varied.
EN
27