Publicidad
Idiomas disponibles
Idiomas disponibles
48 TROUBLESHOOTING
Icemaker
isnot
making
enough
ice (continued)
Doors are opened
often o rfor
long p eriods oftime
Dispensing
wafer
slowly
Doors are not c losed
completely
The t emperature
setting for t he
freezer istoo warm
Water filter has b een exhausted
Reverse
osmosis
filtration
system
is used
Low house
wafer
supply
pressure.
If the doors of the unit are opened often, ambient
air will warm the refrigerator
which will prevent
the unit from maintaining
the set temperature
Lowering
the refrigerator
temperature
can help,
as well as not opening
the doors as frequently
If the doors
are not properly
dosed,
ice
production
will be affected,
See the Doors will
not close completely or pop open section in Parts
& Features Troubleshooting
for more information
The recommended
temperature
for the freezer
compartment
for normal ice production is O°F (-18°C)
If the freezer temperature
is warmer, ice production
will be affected
It is recommended
that you replace the wafer filter:
•
Approximately
every six months.
•
When the water filter indicator
turns on
•
When the water dispenser
output
decreases
•
When the ice cubes are smaller than normal
Reverse
osmosis
filtration
systems
can
reduce
the
water
pressure
below
the
minimum
amount
and
result
in icemaker
issues
If the problem
persists,
it may be necessary
to
contact
a plumber.
The wafer pressure
must be between
20 and 120
psi (140 and 830
kPa) on models
without
a wafer
filter and between
40 and 120 psi (280
and 830
kPa) on models
with a water filter
If the problem
persists,
it may be necessary
to
contact
a plumber.
Publicidad
