Dirt Devil CENTRINO cleancontrol 3.0 Manual De Instrucciones página 12

2 Use
2.1 Assemble appliance and adjust nozzles to surface
2 Use
1
click!
click!
6
WARNING:
Risk of injury! Only attach the appliance parts when the appliance is not
connected to the power supply. Otherwise the machine might start up
and parts of your body, hair or pieces of clothing might be sucked in.
CAUTION:
Before assembling, make sure that the fitted nozzle suits the surface
that is to be cleaned. Never use a brush with rotating bristles for exam-
ple to clean floors or objects that may not be able to withstand the treat-
ment without damage. Observe the flooring manufacturer's recommen-
dations and care information.
NOTE:
You might have to twist the parts when connecting them so they are
securely in place.
2.2 How to vacuum
11
WARNING:
Risk of injury! Check appliance and power cord before each use. Never
use a damaged appliance.
CAUTION:
Only use the appliance with all filters undamaged, in dry condition and
when correctly fitted. Make sure that no objects obstruct the telescopic
tube, the suction hose or other openings.
1. Pull the cable out of the appliance (Fig. 11).
WARNING:
Danger of electric shock! If the red marking is visible (Fig. 12), retract
the cord by pressing the cord retraction button ( ) to pull in the cord up
to the yellow mark (Fig. 13) . Otherwise, the power cord may be dam-
aged.
12
2
7
12
3 4
optional
option
optioneel
opcional
opzionale
opsiyonel
9
8
1. Connect suction hose and appliance (Fig. 1).
2. Insert the accessory included in the scope of delivery onto the handle
(Fig. 2 - 10) depending on what type of surface you want to vacuum:
- Furniture brush (Fig. 2) for objects with a sensitive surface
- Crevice nozzle (Fig. 3) for crevices in upholstery
- Optional mini turbo brush (Fig. 4) for non-sensitive upholstery,
runner, mats, and the like
- Floor nozzle with switch position as in Fig. 8 for carpets
- Floor nozzle with switch position as in Fig. 9 for hard floors
- Optional parquet brush (Fig. 10) for sensitive hard floors
3. Ensure that the bypass vent is closed (Fig. 5).
4. If you use the telescopic tube, adjust its length (Fig. 6).
13 14
2. Insert the plug into a mains socket.
3. Switch on the appliance using the on/off switch ( ) (Fig. 14).
NOTE:
When vacuuming the bypass vent (Fig. 5) must be completely closed.
With its help you can quickly reduce the suction power to release
objects (e.g. curtains) that have been sucked in.
4. Vacuum dust (Fig. 15).
WARNING:
Risk of injury! Especially when vacuum-cleaning stairs make sure that
you always stand on a higher level than the appliance.
3 Maintenance and care
5
optional
option
optioneel
opcional
opzionale
opsiyonel
10
15