Descargar Imprimir esta página

SOMFY ILMO 2 40 Guia página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
EN
3. 3. ANTI-FREEZE PROTECTION
The anti-freeze protection function operates in the same way as the obstacle detection function:
If the drive detects any resistance, it does not move in order to protect the roller shutter:
-
The roller shutter remains in the initial position.
-
The automatic antifreeze protection prevents damage to the shutter when the last slat of the shutter is
frozen onto the windowsill. However, if the shutter is (completely) frozen in its guide rails or if a single slat
is frozen solid to another, this may reduce the effectiveness of the antifreeze protection. In this event, it is
still possible that damage may be caused to the shutter. It is very rare for the shutter to become frozen in
this way. In such a case, refrain from using the roller shutter until the ice has been removed.
4. TIPS AND RECOMMENDATIONS FOR USE
Questions concerning the ILMO 2 40 WT?
Problems
The roller shutter is not operational.
5. TECHNICAL DATA
Power supply
Operating temperature
Index protection rating
Electrical insulation
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an
approved collection point for recycling.
SOMFY ACTIVITÉS SA, F-74300 CLUSES as manufacturer hereby declares that the drive covered by these
instructions when marked for input voltage 230V~50Hz and used as intended according to these instructions, is
in compliance with the essential requirements of the applicable European Directives and in particular of the
Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Antoine Crézé, Approval manager, acting on behalf of Activity director, Cluses, 07/2018.
18
Possible causes
The drive is hot.
230 V
50 Hz
- 20°C to + 60°C
IP 44
Category II
Copyright © 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Solutions
Wait for the motor to cool down.
ILMO 2 40 WT

Publicidad

loading