Bosch PBH 2200 RE Manual Original página 15

(13) Depth stop
(14) Securing screw for keyed chuck
a)
(15) Keyed chuck
(16) SDS plus shank for drill chuck
a)
(17) Suction opening
(18) Saugfix clamping screw
a)
(19) Saugfix depth stop
Technical Data
Rotary hammer
Article number
Rated power input
Impact rate
Impact energy per stroke according to
EPTA-Procedure 05:2016
No-load speed
Tool holder
Spindle collar diameter
Max. drilling diameter
– Concrete
– Steel
– Wood
Weight according to EPTA-Proced-
ure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/Vibration Information
Noise emission values determined according
to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 94 dB(A); sound power
level 105 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN IEC 62841-2-6:
Hammer drilling into concrete: a
h
2
Chiselling: a =11.9 m/s , K=1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
Bosch Power Tools
a)
a)
a)
min
min
mm
mm
mm
kg
2 2
=16.0 m/s , K=1.5 m/s ,
2
,
(20) Saugfix telescopic tube
a)
(21) Saugfix wing bolt
a)
(22) Saugfix guide tube
(23) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
PBH 2200 RE
3 603 C44 4..
W 570
-1
0–5100
J 1.8
-1
0–2000
SDS plus
43
22
13
30
2.2
/II
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Auxiliary handle
Do not operate your power tool without the auxiliary
u
handle (12).
Make sure that the auxiliary handle is always
u
tightened. Otherwise you could lose control of the power
tool when working.
English | 15
a)
a)
PBH 2600 RE
3 603 B44 4..
600
0–5100
1.9
0–2000
SDS plus
43
22
13
30
2.2
/II
1 609 92A 86G | (13.07.2022)