Publicidad
Idiomas disponibles
Idiomas disponibles
13
Pop Up Alerts (Figure 14)
Display critical information such as:
•
Parking Brake Alert (shown) - Engage parking brake.
•
PTO Switch Alert - Turn off PTO switch.
•
Low Power Alert - Battery State of Charge (SoC) low.
•
Critical Low Power Alert - Battery SoC critically low. Unit
goes into 'Limp Mode'. See Limp Mode.
•
Power Down Alert - Unit powering down due to
insufficient battery SoC or battery temperature issue.
See Limp Mode.
•
Charge Reminder Alert - Battery needs to be charged.
•
Trouble Codes - System fault has occurred. See Trouble
Codes in the Troubleshooting section.
NOTE: Pop Up Alerts scroll down from the top of the screen.
NOTE: Tap the check box (A) on the pop up alert screen to
return to the drive screen.
12
14
Settings Screen (Figure 15)
The Settings Screen lets the operator access information
about the unit:
•
System Information - Displays current versions of
component firmware and software.
•
Show Trouble Codes - Displays any current Trouble
Codes (see Trouble Codes in the Troubleshooting
section).
15
ferrismowers.com
Publicidad
