Zipper Maschinen ZI-HS16E Instrucciones De Servicio página 31

14 ASSEMBLY
14.1 ZI-HS16E
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
A. Attaching the wheel shaft: Attach the wheel shaft
with U-bolts and lock nuts to the splitter.
B. Mounting the wheels: Place a washer onto the axle,
then a wheel followed by another washer, and secure
with a cotter pin. Repeat procedure for the other side.
C. Expanding the wedge ram:
stand against the wedge, lower both control handles
to expand wedge ram (1). Insert the L pins to secure the
cylinder to the splitter (2). Lock the L pins into the
spring tabs (3,4).
ASSEMBLY
Keeping the support
31