Descargar Imprimir esta página

Zipper Maschinen ZI-HS16E Instrucciones De Servicio página 44

Ocultar thumbs Ver también para ZI-HS16E:

Publicidad

Idiomas disponibles

Idiomas disponibles

18 DISPOSAL
Observe the national waste disposal regulations. Do not dispose of the machine,
machine components or equipment in residual waste. If necessary, contact your local
authorities for information on the disposal options available. If you buy a new machine
or an equivalent device from your specialist dealer, he is obliged in certain countries to
dispose of your old machine properly.
Waste oils are toxic and must never be discharged into the environment. If necessary,
contact your local authorities for information on proper disposal.
19 TROUBLESHOOTING
PROBLEM
Motor does not start
Incorrect motor rotation
direction
Log Splitter does not
work while motor
running
Log Splitter works with
abnormal vibration and
noise
All repairs on this machine must be carried out by a specialist
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
PROBABLE CAUSE
Switch is Off
Self-locking sleeve is
disconnected (see chapters
14.2.1 and 14.2.2).
Incorrect connection
Valve is not opened owing to
the connection parts loosening
Control Levers or connection
parts bent
Lower hydraulic oil level
Lower hydraulic oil level
for this product!
DISPOSAL
REMEDY SUGGESTED
Set switch to On
Connect self-locking sleeve
Reverse polarity (by an
electrician)
Check and tighten the parts
Repair the bent parts
Check and refill hydraulic oil
Check and refill hydraulic oil
44

Publicidad

loading

Este manual también es adecuado para:

Zi-hs22ezZi-hs30ezZi-hs30z