Zipper Maschinen ZI-HS16E Instrucciones De Servicio página 34

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
B. Attaching the PTO cover: Attach the PTO cover with
two M10 nuts to the splitter.
N O T I C E
Motor does not start if PTO cover not
attached (safety switch).
C. Expanding the wedge ram:
stand against the wedge, lower both control handles
to expand wedge ram. Insert the L pins to secure the
cylinder to the splitter. Lock the L pins into the spring
tabs.
ASSEMBLY
Keeping the support
34