Publicidad
Idiomas disponibles
Idiomas disponibles
Description of the transmitter base
12
11
15
16
17
11
On/Off switch
12
Charging pins
Headset battery charge indicator light (lights up red when
13
the battery is charging, then turns green when the headset
battery is charged)
14
Pairing button
15
3.5mm jack socket
16
Optical input (S/PDIF)
17
5V power connector
38
13
14
11
(micro USB port)
charging the headset
You can charge the headset battery with or without the charging
base.
With the charging base
*
2~3 hrs
*
Accessories not included.
*
1.
Connect one end of the micro USB cable supplied to the USB
port of the charging base.
2.
Plug the other end into a free USB port on your computer.
You can also use a USB mains charger (not provided).
3.
Place the wireless headset on the connector of the charging
base. The indicator lights on the headset and the base will
light up red.
4.
When the headset is fully charged, the indicator light on the
base will turn green. You can then remove the headset from
the base and start using it.
Low battery:
flashing red base
indicator light
Charging:
steady red base
indicator light
Charging complete:
steady green base
indicator light
39
Publicidad
