essentiel b CT702 Instrucciones De Uso página 23

Comments:
• In most cases, this configuration mutes the sound from
your television speakers. The sound is then only available
through the headset.
• You can also use a 6.35 mm jack adapter (not provided) on
one end of the 3.5 mm jack cable provided if you wish to
connect the base to an audio source equipped with a 6.35
mm headset jack (Hi-Fi system, audio amplifier, etc.).
CONNECT THE BASE STATION TO THE RCA
JACKS OF YOUR SOUND SOURCE
1
2
1. Connect the red and white RCA jacks of the audio cable
provided to the red and white RCA sockets of your television.
These are either on the back or on one side of the television.
Refer to your television set's operating instructions to find
them easily.
2. Connect the 3.5 mm jack end of the audio cable provided to
the AUX socket on the back of the base.
44
Comment:
In most cases, this configuration mutes the sound from your
television speakers. The sound is then only available through the
headset.
Using the headset in wired mode
1
1. Connect one end of the 3.5 mm jack/jack cable provided to
the headset socket on your audio source (MP4 player, phone,
portable speaker, etc.)
2. Connect the other end to your headset's 3.5 mm jack socket.
Comment:
The ON/OFF button and touch controls are deactivated in this
mode; Volume must be adjusted directly on the audio source.
2
45