essentiel b CT702 Instrucciones De Uso página 22

!
Warning! Make sure that the volume of your audio
source is high enough. If not, the product may not be
able to detect the signal and will go into standby mode.
We recommend setting the volume of your audio
source to at least 50% to ensure the signal is strong
enough.
Note: You can adjust the end volume using the - and +
on your headset.
CONNECT THE BASE TO THE OPTICAL SOCKET
OF YOUR SOUND SOURCE
This connection provides the most accurate sound transmission
via a fibre optic cable (without signal loss).
2
1
42
1. Connect one end of the optical cable provided to the
OPTICAL input socket on your television. This is either on the
back or on one side of the television. Refer to your television
set's operating instructions to find it easily.
2. Connect the other end of the cable to the DIGITAL OPTICAL
output on the back of the base.
Comment:
When using an optical cable, remember to remove the protective
cap from the connector. When inserting the connector, you may
feel a slight resistance before the connector is fully inserted.
CONNECT THE BASE TO THE 3.5 MM JACK OF
YOUR SOUND SOURCE
1
2
1. Connect one end of the 3.5mm jack/jack cable provided to
the headset socket on your television. The headset socket
is either on the front or on one side of the television. Refer
to your television set's operating instructions to find it easily.
2. Connect the other end of the cable to the AUX port on the
back of the base.
43