Publicidad
Idiomas disponibles
Idiomas disponibles
ATTACHING THE FAN BLADES
CAUTION: Before continuing installation, confirm that the power
is still turned o at the main circuit breaker or by removing the
circuit fuse. Turning the power o using a wall switch is not
su cient to prevent electrical shock.
Step 1. Line up the holes in the fan blades with the holes in the motor
flywheel. Attach fan blades to the flywheel with blade screws and
washers provided. Tighten to secure. (Fig. 18)
14 | KICHLER.COM
Fig. 18
Motor Flywheel
Blade Screw and Washer
Motor Body
Fan Blade
Publicidad
