Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION OF SAFETY SUPPORT
(Required For Canadian Installation Only )
A safety support cable is provided to help prevent the ceiling
fan from falling, please install it as steps below.
Step1. Slip the spring washer, then the flat washer onto the wood screw,
then drive the wood screw into the side of the brace that holds the outlet
box. Leave 3mm (1/8") of space between the support brace and the flat
washer. ( Fig.11 )
Step2. Insert the safety cable through the mounting bracket and one
of the holes in the outlet box into the ceilling. Adjust the length of the
safety cable to reach the screw and flat washer by pulling the extra
cable through the cable clamp until the overall length is correct,
put the end of the cable back through the cable clamp, forming a loop
at the end of the cable. Tighten the cable clamp securely. Now, put
the loop in the end of the safety cable over the wood screw and under
the flat washer. Tighten the wood screw securely. ( Fig.12)
NOTE: Although the safety support cable is required for Canadian
installations only, it is a good idea to make the attachment with any
installation.
10
KICHLER.COM
Support Brace
Ceiling
Outlet Box
Cable Clamp
Safety Cable
Wood Screw
Flat Washer
Spring Washer
Wood Screw
Fig. 11
Fig. 12
Publicidad
