Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
Solution
Fan will not start.
1. Check circuit fuses or breakers.
2. Check all electrical connections to ensure proper contact.
CAUTION: Make sure the main power is OFF when checking any electrical connection.
1. Make sure all motor housing screws are snug.
Fan sounds noisy.
2. Make sure the screws that attach the fan blade brackets to the motor are tight.
3. Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.
CAUTION: Make sure main power is o .
4. Allow a 24-hour "breaking-in" period. Most noise associated with a new fan disappears during this time.
5. If using an optional light kit, make sure the screws securing the glassware are tight. Make sure the light bulbs are not
touching any other component.
6. Do not connect this fan to a wall mounted variable speed control(s). They are not compatible with ceiling fan motors
or remote controls.
7. Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
1. Check that all blade and blade arm screws are secure.
Fan wobble.
2. Most fan wobbling probems are caused when blade levers are unequal. Check this level by selecting a point on the
ceiling above the tip of one of the blades. Measure this distance. Rotate the fan until the next blade is positioned for
measurement. Repeat for each blade. The distance deviation should be equal within 1/8".
3. If the blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and
possibly result in smoother operation.
WARNING: To reduce the risk of personal injury and to ensure the proper operation of your ceiling fan,
never attach the blade assemblies until the ceiling fan has been mounted on the ceiling.
Do not bend the blade while installing, Balancing or cleaning the fan. Do not Insert foreign objects
between rotating fan blades.
52" Spyn Lite
17
Publicidad
