Kichler Spyn Lite 300375 Manual De Instrucciones página 15

INSTALLING THE SWITCH HOUSING (CONTINUED)
Step 2. Raise the switch housing close to the fan, and push the square wire
connectors together (one from the fan and one from the switch housing).
(Fig.21)
NOTE:
The connectors will ONLY engage when the color coded strips are
matched (aligned).
Step 3. Carefully push all the wires into the switch housing. Attach the
switch housing to the switch cover with the mounting screws that were
removed in Step 1. Make sure each screw is tight. (Fig. 21)
Step4. Install the pull chain extension and fob. (Fig. 22)
Mounting Screws
Wire Connectors
Switch Housing
Pull Chain Extension and Fob
Switch Cover
Fig. 21
Fig. 22
52" Spyn Lite 15