Nolan X Serie Seguridad E Instrucciones página 22

X-804
SAFETY VISOR LOCK SYSTEM ( SVLS )
The Nolan X-804 RS U.C. helmet features the Safety Visor Lock System, which reduces
the risk of accidental opening of the visor. The system consists of two components: the
red safety slider A and the visor open button B (Fig. 1). When the red safety slider A is
in the lower position (Fig. 1), the visor open button B can be pressed freely, allowing
the visor to be operated as normal. When the red safety slider A is intentionally moved
upwards (Fig. 2), the "safety catch" will be engaged and the visor open button B will
be locked.
1 VISOR OPENING/CLOSING AND DEFOGGING FUNCTION
To open the visor, ensure that the red safety slider A is in the lower position (Fig. 1),
press the visor open button B while simultaneously turning the visor upwards using
the central tab. The lower tooth will come out of the fastening seat in the Safety Visor
Lock System.
The side mechanisms of the visor are equipped with several positioning stops for in-
termediate and stable positions of the visor. The first stop keeps the visor open to a
minimum to improve the circulation of air and facilitate defogging, especially at low
speeds or during short stops.
To close the visor from any of the stable intermediate positions, push the visor down-
wards until its lower tooth engages in the Safety Visor Lock System and its central tab
rests against the visor open button B, in the minimum open position described above
(Fig. 3). Press the central tab of the visor further to lock it in the fully closed position,
letting the visor open button B snap into position.
If the red safety slider A is positioned upwards when closing the visor (Fig. 2), the
pressure to be exerted on the tab to close the visor will be greater and the closing
snap will be more evident.
2 VISOR LOCK FUNCTION
After closing the visor completely as described above, press the red safety slider A so
that it snaps upwards (Fig. 2). In this position, the "safety catch" is engaged and the
visor open button B is locked: since it cannot be pressed, it becomes impossible to
open the visor, thereby reducing the likelihood of accidental opening.
To unlock the Safety Visor Lock System and restore the normal operation of the visor,
press the red safety slider so that it snaps downwards (Fig. 1).
WARNING
- When using the helmet, it is recommended that you limit the use of the visor-lock
function, since unexpected events may require you to open your visor immediately.
VISOR ( XFR - 03 )
1 DISASSEMBLY
1.1 Open the visor completely.
1.2 Lift the folding flange A of the left side mechanism screw and unscrew it by hand
until it is completely removed from its seat (Fig. 4).
1.3 Remove the visor from the helmet, with its spacer ring snapped onto the side of
the visor itself, by releasing the inner teeth B from their seats on the side mecha-
nism attached to the helmet shell (Fig. 5).
1.4 Follow the previous operations on the right side of the helmet.
20
INSTRUCTIONS FOR USE