Publicidad
Idiomas disponibles
Idiomas disponibles
4
Operation
■
Operations
■
Changing the set temperature
NOTE
• For the range of temperatures that can be set, refer to the Owner's Manual for the wired remote control.
• The temperature setting cannot be changed when "Fan" is set.
• If the operation mode is set to "Auto" and dual set point is set, refer to <Individual temperature settings for "Cool"
and "Heat" in auto operation modes (dual set point)>. Refer to the Owner's Manual for the wired remote control.
17-EN
1140902101_EN FR ES.indb 9
1140902101_EN FR ES.indb 9
1
Push [
ON/OFF] to start operations
The operation LED lights.
2
Push [
] and [
] to select the item you
want to change
You can change the following items.
Setting temperatures
Operation mode
Fan speed
Wind direction
3
To stop operations, push [
ON/OFF]
again
1
Push [
] and [
] to switch to the "Set
temp." screen
2
Push [
] and [
] to change the
temperature setting
Push [
] to increase and push [
] to
decrease the set temperature.
– 9 –
■
Changing the operation mode
NOTE
Operation modes that cannot be set are not shown, according to the model of indoor unit.
■
Changing the fan speed
NOTE
• When the operation mode is "Fan", you cannot select "Auto".
• The fan speed that can be set varies depending on the indoor unit connected.
• "
" is displayed when combined with an indoor unit that cannot do "Fan Speed".
1
Push [
] and [
] to switch to the
"Mode" screen
2
Push [
] and [
] to select an operation
mode
Auto
Heat
Dry
Fan
Cool
1
Push [
] and [
] to switch to the "Fan
Speed" screen
2
Push [
] and [
] to select fan speed
Auto
High
Medium +
Medium
Low +
Low
11/14/23 7:07 PM
11/14/23 7:07 PM
18-EN
Publicidad
