Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance Works
Replacing the suction lips
Compress the fastening devices and
pull the vacuum lips out of the vacuum
bar towards the bottom.
Remove the vacuum lips from the hold-
er.
Note:
Thanks to the perforation pattern the vacu-
um lips cannot be mixed up. They cannot
be turned and reinstalled.
Replace vacuum lips.
Insert the holder with the vacuum lips
into the vacuum bar and snap into
place.
Replacing the brush roller
WARNING
Risk of crushing due to the park support
folding in during brush replacement. Turn
the steering wheel 45° to the left before
commencing brush replacement.
Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
Place the new brush roller on the driver
and lock into place on the opposite side.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
26
Removing the batteries
DANGER
The removal of the batteries may only be
performed by Kärcher Customer Service or
a specialist.
Classification as whether the batteries are
damaged is done by an authorised Cus-
tomer Service technician
The Chapter "Safety instructions" for han-
dling accumulators must be observed un-
conditionally.
1 Screw
2 Cover
Unscrew 2 screws.
Swivel the lid downwards.
Loosen and remove the battery plug.
Remove the left-hand battery.
Remove the right-hand battery.
Dispose of the used batteries according
to the local provisions.
– 10
EN
Disposal
Publicidad
