Publicidad
Idiomas disponibles
Idiomas disponibles
6
OPERATION
5.
OPERATION
To Start
1. When turning ON the indoor unit, initial
process will start.
2. Set at your required temperature by pressing
the
switch. The set temperature is
indicated on the
display.
3. Select one of the fan speed by pressing
the
,
,
switches. The set fan speed
is indicated by the green LED
4. Press the
Switch. The red LED
turns ON.
ºC
HITACHI
ºC
.
Temperature Indication
RUN LED (Red)
RUN/STOP Switch
Temperature Setting Switch
FAN SPEED (Green)
FAN SPEED Setting Switch-High
FAN SPEED Setting Switch-Medium
FAN SPEED Setting Switch-Low
To Stop
1. Press the
Switch. Air Conditioning is
stopped and all the LEDs are turned OFF.
In order to restart, press the
NOTES:
- Swing Louver Setting is not available.
Select by Central Station or other remote
control switch.
Default: Auto Swing
- In the case that the remote control switch
not available mode is set by central
station, setting is not available.
switch.
Publicidad
