c. On the right side of the saw, hold the rip fence
upside down under the rails. Latch both of the
rip fence lock levers (Fig. 9d).
d. Gently slide the rails back toward the center
until the fence is close to the table saw frame,
and then engage the rail locking lever.
Smart guard system and riving knife storage
When not in use, the smart guard system and/or
riving knife can be stored under the table.
Slide smart blade guard assembly and/or riving
knife into holder as shown, then turn lock 1/4
turn to lock the smart guard system in place.
Anti-kickback device storage (Fig. 9f)
When not in use, store the anti-kickback device
under the right side of the table.
Slide the anti-kickback device across the
storage bracket and release pawl release button
to lock into place.
(Fig. 9e)
Fig. 9d
Rail Locking
Lever
Rail Adjustment Knob
Fig. 9e
Smart Guard
System
Lock
Fig. 9f
-25-
Rip Fence
Lock Lever
Anti-kickback Device