Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Initial configuration of Hansgrohe
RainBrain
The configuration and the welcome screen are offered every time the device
is turned on until the initial installation is performed.
Configuration with Hansgrohe shower products:
Perform the following steps:
•
Figure 1 Select your language by pressing the corresponding button on the
display (German is default setting). Press Next.
•
Figure 2 Select the desired temperature scale (Celsius or Farenheit) on the
display. Press Next.
•
Figure 3 In the shower assignment screen, press:
Hansgrohe products. Press Next.
•
Figure 4a/4b Select between showerhead, handshower, and bodysprays
step by step from the Hansgrohe assortment. Press Next.
•
Figure 5a/5b If applicable, set up music,. Required accessories: an audio
amplifier and speakers for music playback.
•
Figure 6 Select the desired showers for the cascade function. Press Next.
•
Figure 7 Conclude the configuration by selecting OK.
•
The basic image will be displayed.
Configuration with shower products by other manufacturers:
Perform the following steps:
•
Figure 1 Select your language by pressing the respective button on the
display (German is default setting). Press Next.
•
Figure 2 Select the desired temperature scale (Celsius or Farenheit) on the
display. Press Next.
•
Figure 3 In the shower assignment screen, press: Other products. Press
Next.
•
Figure 8 Select a connection. After this selection, you will be taken to select
the appropriate symbol.
•
Figure 9a/9b Select the corresponding symbol for the connected fittings
and showers (up to 5 possible). Select a blank field for unused connections.
Press Next.
•
Figure 10 If applicable, set up music. Required accessories: an audio
amplifier and speakers for music playback. Press Next.
•
Figure 6 Select the desired showers for the cascade function. Press Next.
•
Figure 7 Conclude the configuration by selecting OK.
•
The basic image will be displayed.
All settings and symbols can be changed later in the settings menu by selecting
connection configuration.
The combination must be started with the Start/Stop key on the rotary knob
in order not to activate any other functions. All keys must be pressed until the
system level is displayed.
+
+
English
1
Back
Configuration
Welcome
Language
Deutsch
Back
Next
Configuration
How should the tempe-
rature be displayed?
°C
°F
Next
1
Publicidad
Tabla de contenido
