Error Display - Hansgrohe RainBrain 15841 1 Serie Instrucciones De Montaje

Contrast shower
While one shower is
1.
active, it starts running
in contrast shower
2.
mode. If no shower
is active, the contrast
shower mode is turned
on but does not start
until the user selects a
shower.
Cascade
While one shower is
1.
active, it starts running
in cascade mode. If no
2.
shower is active, the
cascade shower mode
is turned on but does
not start until the user
selects a shower.
Settings
• User
• Standard tempera-
1.
ture
• Temperature °C/°F
2.
• Switch-off time
• Time and date
• Display and key
1.
sounds
• Start animation
2.
• Automatic lights
• Language
3.
• Bluetooth connec-
tions (the preset PIN
is 0000)
• Factory settings
• About RainBrain
• Demo mode
System level
Press for 3 seconds
+
+
• Configuration wizard
• Error memory
English

Error display

If there is danger pre-
sent, the base image
is overwritten with this
warning.
All showers and other
functions are switched
off.
Error display:
A maximum of four errors
are displayed.
Three types
of errors can
occur:
No danger:
Errors that do not re-
present a hazard to the
user or the device.
You can still shower, if
the selected functions
are not effected by this
error.
The base image
appears after acknow-
ledgment. The system
will be available
again. If you select
functions that are
effected by this error,
the error message will
be displayed again.
Contact qualified
service personnel
to fix the error.
Emergency mode:
Even though an error
has occurred, you can
continue to shower in
emergency mode.
The emergency
run screen will be
displayed. Only the
hand shower can be
selected in this case.
Contact qualified
service personnel
to fix the error.
Hazard:
Errors that do represent
a danger to the user
or to the device. The
system is not available.
With this key combina-
tion, the user will get to
the system level and to
the error list.
+
Contact qualified
+ service personnel
to fix the error.