Publicidad
Idiomas disponibles
Idiomas disponibles
CR 5034
ELEMENTS OF THE TOWER
INSTRUCTIONS FOR USE
When the appliance is plugged in, turn on the power switch on the back of the product. After hearing the
"beep", the digital display will show the room temperature, and the product will be in standby status at
that time.
ON/OFF. Press the power button to select low heat mode, high heat mode, or off:
o Press once and the blue light will come on (Low Heat Mode).
o Press the second time and the red light will come on (High heat mode).
o Press the third time, the product indicator light will be off in any working condition (except digital
display). When entering off mode, the air fan will remain for 15 seconds, when the counter reaches
00 it will flash three times, a "beep" will be heard and the screen returns to showing the room
temperature. The product returns to standby mode.
Press the "Swing" button to start swing mode.
With the "Timer" button you can start a sleep timer between 1 and 24 hours.
Select the desired temperature with the "Temp" button: set the temperature between 15 and 40 degrees.
In this operating mode, press "ON/OFF" to return to manual mode.
Press and hold the temperature button and timer button at the same time for 3 seconds, the keypad will
be locked. Press them again to unlock it.
Press and hold the "Swing" button to turn the lights off and press any key to turn them on again.
BASE INSTALLATION
Snap the two parts of the base together and slide the top part to the left as shown below:
14
Publicidad
