Broan CBX1 Serie Manual De Instrucciones página 2

BR N
CBX1 SERIES
Page 2
OPERATION
Always turn the hood ON before cooking in order to establish an
air flow in the kitchen. After turning off the range, let the hood run
for a few minutes to clear the air.
This range hood is equipped with the latest in capacitive touch
technology. The buttons do not move, but are touch sensitive.
When a touch is understood, the control will emit a sound.
@©
1. Touch any button to "wake up" the control.
@
FAN
2. Touch fan button to turn fan on to low speed.
3. Touch fan button again for medium speed, high
speed, and fan off.
The graduations under the fan icon in the LCD screen
will illuminate to indicate the current fan speed setting.
©
LIGHT
2. Touch light button to turn light on to dim setting.
3. Touch light button again for medium, bright, and
light off.
The graduations under the light icon in the LCD
screen will illuminate to indicate the current light
intensity setting.
@
DELAY OFF
This feature allows the fan to run for 10 minutes, then
automatically shut the fan off. Use this feature to clear
the air after you are finished cooking.
1. While fan is operating, touch the delay off button.
The button will flash while the delay off feature is
active.
@
FILTER CLEAN
The filter clean reminder will flash when it is time to
clean or replace the filter, based on your individual
use pattern.
To reset filter clean reminder indicator, touch and hold
button for three seconds.
HEAT SENTRY
The heat sentry continuously monitors temperature and will
automatically turn the fan on to high speed when the temperature
is above normal.
LIGHT BULBS
The light bulbs included with this hood are the latest in LED
cooktop illumination technology - offering bright lighting and
lasting up to 10 times as long as a normal bulb. While they are
available as service parts, these bulbs are designed to last the
life of the hood.
CLEANING & MAINTENANCE
Proper maintenance of the Range Hood will assure proper
performance of the unit.
Motor
The motor is permanently lubricated and never needs oiling. If
the motor bearings make excessive or unusual noise, replace
the motor with the exact service motor. The impeller should also
be replaced.
Grease Filter
The grease filter should be cleaned frequently. Use a warm
dishwashing detergent solution. Grease filter is dishwasher safe.
Clean all-metal filters in the dishwasher using a non-phosphate
detergent. Discoloration of the filter may occur if using phosphate
detergents, or as a result of local water conditions - but this will
not affect filter performance. This discoloration is not covered by
the warranty.
See "INSTALL FILTERS" section for removal and installation
instructions.
Non-ducted Recirculation Filter
The non-ducted recirculation filter should be changed every 3-6
months. Replace more often if your cooking style generates extra
grease, such as frying and wok cooking.
Stainless Steel Cleaning
DO:
• Regularly wash with clean cloth or rag soaked with warm
water and mild soap or liquid dish detergent.
• Always clean in the direction of original polish lines.
• Always rinse well with clear water (2 or 3 times) after cleaning.
Wipe dry completely.
• You may also use a specialized household stainless steel
cleaner.
DON'T:
• Use any steel or stainless steel wool or any other scrapers to
remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction residues reach the
hood. During construction/renovation, cover the range hood
to make sure no dust sticks to the stainless steel surface.
Avoid: When choosing a detergent
• Any cleaners that contain bleach will attack stainless steel.
• Any products containing chloride, fluoride, iodide, bromide
will deteriorate surfaces rapidly.
• Any combustible products used for cleaning, such as acetone,
alcohol, ether, benzol, etc. are highly explosive and should
never be used close to a range.
The fan button will flash while heat sentry is active.
After the temperature returns to normal, the heat sentry will return
the fan to it's previous setting.