Selco Quasar 320 SMC Classic Instrucciones De Uso página 32

3 SYSTEM PRESENTATION
3.1 General
The Quasar 320 SMC Classic, Smart, Exclusive - Quasar 400
SMC Classic, Smart, Exclusive are constant current inverter
power sources developed for electrode (MMA), MIG/MAG.
They are fully digital multiprocessor systems (data processing on
DSP and communication over CAN-BUS), capable of meeting
the various requirements of the welding world in the best pos-
sible way.
3.2 Front control panel
Quasar 320/400 Classic
Quasar 320/400 Smart
Quasar 320/400 Exclusive
1 Power supply
Indicates that the equipment is connected to the mains
and is on.
2 VRD Voltage Reduction Device
Shows that the no-load voltage of the equipment is
controlled.
32
3 General alarm
Indicates the possible intervention of protection devices
such as the temperature protection.
4 Power on
Indicates the presence of voltage on the equipment
outlet connections.
5 7-segment display
Allows the general welding machine parameters to be
displayed during start-up, settings, current and voltage
readings, while welding, and encoding of the alarms.
6 Main adjustment handle (Quasar...Classic)
Allows entry to set up, the selection and the setting of
the welding parameters.
Allows continuous adjustment of the wire feed speed.
7 Main adjustment handle (Quasar...Classic)
Allows the regulation of the arc voltage.
Allows regulation of the arc length during welding.
High voltage = long arc
Low voltage = short arc
Minimum 5V, Maximum 55.5V
8 Main adjustment handle (Quasar...Smart)
Allows entry to set up, the selection and the setting of the
welding parameters.
Allows wire speed adjustment in manual MIG welding
and synergy correction in synergic MIG welding
9 Main adjustment handle (Quasar...Smart)
Allows the regulation of the arc voltage.
Allows regulation of the arc length during welding.
High voltage = long arc
Low voltage = short arc
Minimum 5V, Maximum 55.5V
10 Main adjustment handle (Quasar...Exclusive)
Allows the welding (MMA) current to be continuously
adjusted.
Allows entry to set up, the selection and the setting of
the welding parameters.
Allows continuous adjustment of the wire feed speed.
Allows the regulation of the welding current.
Allows the thickness of the part being welded to be set.
Allows the setting of the system via the regulation of the
part being welded.
11 Main adjustment handle (Quasar...Exclusive)
Allows the regulation of the arc voltage.
Allows regulation of the arc length during welding.
Manual MIG/MAG
High voltage = long arc
Low voltage = short arc
Minimum 5V, Maximum 55.5V
Synergic MIG/MAG
Minimum -5.0, Maximum +5.0, Default syn
12 Welding process (Quasar...Exclusive)
Allows the selection of the welding procedure.
Electrode welding (MMA)
Synergic MIG/MAG
Manual MIG/MAG
.