Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3. PRODUCT COMPONENTS
1
2
4. operation AND use
1. Attach high pressure hose to gun. Tighten securely.
3. Assemble grommet kit and quick-connect nozzles ad
described in the instructions supplied.
note
There will be a slight amount of oil in the engine from factory testing.
WARNING!
The shipping plug must be removed and replaced with the dipstick/oil plug before operating pressure washer.
5. Using a 17mm wrench, remove shipping plug from
pump by turning it counterclockwise. Discard plug.
3
4
5
8
7
1. Engine
2. Lower frame
3. Handle
4. Panel
5. Wheel
6. Lance
9
7. Manual spray gun
8. Nozzles panel
9. Hose
6
2. Connect spray wand to gun. Tighten securely.
4. Add engine oil to engine. Refer to engine owners
manual supplied by engine manufacturer for correct
procedure.
6. Remove dipstick/oil plug from plastic bag and install
into pump, tighten securely.
8
Publicidad
