Publicidad
Idiomas disponibles
Idiomas disponibles
EN
How to apply chemicals and cleaning solvents
WARNING!
Applying chemicals or cleaning solvents is a low pressure operation.
WARNING!
Use only soaps and chemicals designed for pressure washer use. Do not use bleach.
To apply chemicals:
1. Press chemical hose onto brabed fitting located near high pressure hose connection of pump.
2. Place other end of chemical hose with filter on it into container holding chemical/cleaning solution.
0º nozzle (Red): This nozzle delivers a pinpoint stream and is extremely powerful. It covers a
very small area of cleaning. This nozzle should only be used on a surface that can withstand this
high pressure such as metal or concrete. Do not use on wood.
15º nozzle (Yellow): This nozzle delivers a powerful 15 degree spray pattern for intense cleaning
of small areas. This nozzle should only be used on areas that can withstand the high pressure
from this nozzle.
25º nozzle (Green): This nozzle delivers a powerful 25 degree spray pattern for intense cleaning
of larger areas. This nozzle should only be used on areas that can withstand the pressure from
this nozzle.
40º nozzle (White): This nozzle delivers a 40 degree spray pattern and a less powerful stream of
water. It covers a wide area of cleaning. It covers a wide area of cleaning, this nozzle should be
used for most general cleaning jobs.
Chemical nozzle (Black): This nozzle is used to apply chemicals or cleaning solutions. Of all the
nozzles, it is the one that offers the least power stream.
10
Publicidad
