Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Symbols used
1.1
In the documentation
1.1.1
Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of fail-
ure to observe action and information given.
Hazard prevention action and information.
c
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word
Probability of
occurrence
DANGER
Immediate impend-
ing danger
WARNING
Possible impending
danger
CAUTION
Possible dangerous
situation
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
Attention
Warns about possible property damage.
!
Information
Practical hints and other useful
i
information.
1.
Multi-step
Instruction consisting of several steps.
2.
operation
One-step
Instruction consisting of one step.
operation
e
Intermediate
An instruction produces a visible
�
result
intermediate result.
Final result
There is a visible final result on
completion of the instruction.
"
1.2
On the product
Observe all warning notices on products and ensure
!
they remain legible.
Robert Bosch GmbH
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | CRI/CRIN SST | 3 |
2.
User instructions
2.1
Important information
Before commissioning, connecting and using Bosch
products, it is essential to go through the operating
instructions – and the safety instructions, in particu-
lar – with great care. By doing so, you can eliminate
any uncertainties in handling Bosch products and as-
sociated safety risks upfront, which is in the interest
of your own safety and will help avoid damage to the
products. If a Bosch product is handed over to another
user, the operating instructions and the safety instruc-
tions must be handed over as well.
2.2
Safety instructions
All safety instructions can be found in the separate
"original instructions DCI 700". These instructions
must be carefully studied prior to commissioning, con-
nection and operation of the CRI/CRIN SST and must
always be observed.
2.3
Other applicable documents
1 689 978 675 – Assembly instructions
<
CRI/CRIN SST
1 689 989 343 – Original instructions DCI 700
<
(400 V) or 1 689 989 473 – Original instructions
DCI 700 (200 V)
DCI 700 Help Center – Online help for DCI 700. The
<
button <?> can be used to call this up in the "DCI"
software.
The QR code leads directly to the Help Center.
i
https://help.boschdiagnostics.com/DCI700
en
|
1 689 989 563
2023-08-01
Publicidad
