Sony KP-48V75 Manual De Instrucciones página 23

4 Press # or ¥ to select CHANNEL ERASE/ADD,
and press = .
The CHANNEL ERASE/ ADD menu appears.
CHANNEL ERASE/ADD
ERASE
ADD
MENU
Usel0 - 9Jor (CH+/-]
to select the channel.
Use O@ @)
5 Erase and/or add channels:
To erase an unwanted channel
(1) Make sure the cursor () is beside ERASE.
(2) Press CH + - or the 0 - 9 buttons to select the
channel you want to erase, and press ENTER.
CH Selected channel number
(+) DO® CHANNEL ERASE/AC=
* DOO. | Be
C) eB) O) Uselo - 9Jor [CH+/-!
QY @) O to select the channel
Use 0@ G@ Zor Gai
(3) Press = .
The "—" inc:cation appears beside the channel
number, showing that the channel is erased
from the preset memory.
To add a channel! that you want
(1) Press # or # to move the cursor (P) to ADD.
(2) Press the 0 - © buttons to select the channel you
want to add, and press ENTER.
Selected channel number
®® 9D
OO 9
@® 9 \*
339
(3) Press C2 .
The "+" indication appears >eside the channel
number, showing that the cnannel is added to
the preset memory.
6 To erase and/or add other channels, repeat
step 5.
7 Press MENU to return to the original screen.
MENU
Notes
* If you erase or add a VHF or UH= channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
¢ Erasing and adding channels is 2:so available for the AUX
input.
Adjusting convergence
(CONVERGENCE)
The projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not have to do this procedure if you perform
AUTO SET UP (page 21). Do this procedure only
when you want to adjust it manually.
1 Press MENU.
2 Press ¢ or # to select = , and press (>.
3 Press #4 or + to select CONVERGENCE, and
press ©.
The CONVERGENCE adjustment screen appears.
Getting Started | 23-EN
Ne